MULCRONE & ASSOCIATES LLC

Emerson makes it easy to simplify lighting for harsh and hazardous locations exposed to ignitable vapors and dusts, dirt, moisture and corrosive chemicals. If you already use our Appleton™ Code•Master™ HID luminaires, you can retrofit the Code•Master™ LED by simply threading the luminaire body into the existing mounting hood, with no need to reconfigure wiring or mounting locations. New installations and upgrades from competing products are also easy because the Code•Master™ LED accepts input ranges of 120–277 Vac and 347–480 Vac, with no need for a step-down transformer. These luminaires feature: • NEC and CEC Certification for Class I, Division 1 locations • Fixture operates safely in high ambient temperatures • Arrangement of heat-producing components results in more efficient heat dissipation for cooler fixture operation • All threaded joints are flame-tight • Safe, easy servicing without disconnecting any wiring • Factory sealed. External seals not required • Globe, driver and LED array are all field replaceable • LED arrays generate light outputs from 2,580 to 13,730 lumens • Choice of replaceable clear or diffused glass globe To learn more about Appleton™ Code•Master™ LED Factory Sealed Luminaires visit: http://www.emerson.com/en-us/catalog/automation-solutions/electrical-components-lighting/task-lighting/appleton-cmled Please like, share, or comment on our video and SUBSCRIBE to our Appleton LED Luminaires YouTube Channel.

The Appleton™ Areamaster™ Generation 2 LED by Emerson provides greater versatility, with models from 9,000 to 38,000 lumens and a choice of beam patterns to meet your diverse floodlighting needs. Featuring optic designs for superior uniformity and coverage, Areamaster™ Generation 2 LED luminaires provide HID equivalent lighting that saves over 75 percent in energy costs and greatly increases luminaire uptime while reducing maintenance burdens. Areamaster™ Generation 2 LED luminaires are easy to retrofit using the same slipfitters and pole brackets as your existing Appleton™ HID floodlights. Rugged and corrosion-resistant, they are certified for Class I, Division 2, Class II, and ATEX/IECEx Zone 2, 22 hazardous locations and rated for use in marine and wet locations for a versatile floodlighting solution with the Appleton™ performance you trust. Whatever your application requires, Areamaster™ Generation 2 LED delivers. These luminaires feature: • Choice of optics for optimal light distribution in a variety of applications. • Separate field wiring compartment with screw terminal block for easy and secure connection (can accept UL/CSA 26- 10AWG). • Yoke bracket is designed to accommodate traditional Areamaster brackets and slipfitters for easy retrofit. • Choice of color temperature (CCT); 5000K cool white or 3000K warm white. • Rugged and compact housing with superior thermal design translates to long luminaire life. • Thermal shock and impact resistant clear or frosted glass lens. • Standard 6KV surge protection. • Field replaceable LED driver and lens cover. To learn more about Appleton™ Areamaster™ Generation 2 LED Luminaires visit: https://www.emerson.com/en-us/catalog/appleton-am-g2-led

Appleton™ Contender™ LED luminaires by Emerson deliver exceptional efficiency, performance and advanced engineering. The compact, light weight, low profile design is suited for low mounting heights. With four different field replaceable globe options (clear and diffused polycarbonate, clear glass, or prismatic glass refractor) it can be customized to application requirements. Three light output levels, are available, offering illumination up to 175W HID equivalents. This series is certified with many of the Mercmaster™ LED Low Profile globes and accessories including the visor, angled reflector, globe guards, and safety cable. The Contender™ LED Luminaire is designed to directly retrofit into an existing to Crouse-Hinds™ Champ® VMV Series mounting hoods. No adapter is required and no new wires to pull. This video walks you through the retrofitting process. These luminaires feature: • Directly mounts to Crouse-Hinds™ Champ® mounting hoods (no adapter) • LEDs have been tested for over 18,000 hours and have a rated L70 of 100,000+ hours with a calculated L70 of much longer • Globe assembly can be quickly removed to replace the globe for modification of light output of the fixture. Reduces storage requirements by minimizing SKUs and swapping/storing globes as necessary by application • Luminaire comes pre-wired with 12” of 14 AWG SOOW cable protruding from the IP68 watertight NPT hub at the top of the luminaire lid • Standard 6 kV surge protection • IP68 Cord Gland Sealed wiring inlet to prevent water ingress into fixture from conduit • High temperature silicon gaskets resist compression set and maintain seal • Safety cable is slipped around the housing through casted retention points To learn more about Appleton Contender LED Series Luminaires visit: https://www.emerson.com/en-us/catalog/appleton-contender-led

Appleton™ A-51™ LED Factory Sealed Luminaires by Emerson are the ideal area/task lighting solution for hazardous locations requiring explosionproof, dust-ignitionproof ratings. They are designed to provide the benefits of LED lighting in low mounting height applications previously served by incandescent luminaires. Easy to install in new and retrofit applications, they utilize in the same mounting hoods as traditional incandescent A-51 luminaires with no rewiring required. Models are available for Group A, B, C and D areas (AAL) as well as strictly Group C and D areas (AL). This video walks you through the retrofitting process. Mounting adapters: • All A-51 LED fixtures are factory sealed; no external sealing fittings required. • Fixture unit easily threads off mounting hood for convenient servicing or for immediate exchange with new fixture. • Light outputs up to 3,200 lumens • Globes in A-51™ fixtures are explosionproof, heat- and impact resistant glass. • Guards to protect globe are easily mounted to globe ring with 3 screws. • Fixture units have standardized threads to fit all A-51 mounting hoods. • 6 kV Surge Protection. • Choice of 5 mountings hood styles. To learn more about Appleton A-51 LED Factory Sealed Luminaires visit: https://www.emerson.com/en-us/catalog/appleton-a-51-led

Appleton™ Mercmaster™ LED Mounting Adapters by Emerson allow facilities to seamlessly retrofit energy efficient, Mercmaster LED Low Profile and Mercmaster LED Generation 3 luminaires to other manufacturers pre-existing HID mounting hoods. Our compact adapters’ design maintains the luminaires compact, light weight, low profile for low mounting heights. Because you are utilizing the existing mounting hood, there is no need to pull new wires, saving labor costs. This video walks you through the retrofitting process. Mounting adapters: • Five design options; 3 standard or straight adapters and 2 offset adapters • Easy, fast installation with no loose parts. • Labor savings; no need to pull new wires. • Casted opening for safety cable connection. • Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360° compression at all points on fixture housing gasket for positive sealing. Swing away design of captive bolt and nut simplifies servicing. To learn more about Appleton Mercmaster LED Mounting Adapters visit: https://www.emerson.com/en-us/catalog/automation-solutions/electrical-components-lighting/task-lighting/appleton-mmled-lp-adapter

Designed for low mounting height applications in harsh industrial and hazardous environments, the Appleton™ Mercmaster™ LED Low Profile by Emerson™ is the ideal solution for upgrading your lighting.

Emerson understands that installing high bays can be costly and hazardous. High ceilings, restricted access, and pre-existing conduit installations can drive labor costs to 30% or more of total lighting project costs. Regardless of the facility and mounting style preferences, the Appleton™ Baymaster™ LED High Bay Luminaires enable faster and safer lighting installations with its low weight, unique design, and flexible mounting options. These luminaires feature: • Quick-mount-pendant system for faster and safer installations • Secondary optics placed over the LED to help shape the light, allowing for a variety of applications • 6 lumen output ranges (9,500 to 38,000) for flexibility of different mounting heights and illumination levels • Two different color options (5000K cool white and 3000K warm white CCT) for superior light quality To learn more about Appleton™ Baymaster™ LED High Bay Luminaires visit: http://www.emerson.com/en-us/automation/brands/appleton/led-lighting Please like, share, or comment on our video and SUBSCRIBE to our Appleton LED Luminaires YouTube Channel.